Dewalt Dc756: Top-notch Specifications, Comprehensive Comparisons, And Trusted Buying Sources

DeWalt DC756 Information

The DeWalt DC756 is a 12-volt cordless drill that is designed for light-duty applications. It features a brushless motor that delivers up to 1,500 RPM and 250 in-lbs. of torque. The drill also has a 2-speed transmission with a 0-450 RPM low speed and a 0-1,500 RPM high speed.

The DC756 comes with a 1.3Ah NiCd battery and a charger. It also has a belt clip and a carrying case. The drill is lightweight and easy to use, making it a good choice for homeowners and DIYers.

Full specifications

Feature	Specification
Voltage	12V
Motor	Brushless
Speed	0-450 RPM / 0-1,500 RPM
Torque	250 in-lbs.
Chuck size	1/2"
Weight	3.4 lbs.
Battery	1.3Ah NiCd

Features

• Brushless motor for longer life and more power
• 2-speed transmission for versatile performance
• 1/2" chuck for use with a variety of bits
• Lightweight and ergonomic design for comfortable use
• Belt clip and carrying case for easy transport

What's in the box

• DeWalt DC756 cordless drill
• 1.3Ah NiCd battery
• Charger
• Belt clip
• Carrying case

The DeWalt DC756 is a good choice for homeowners and DIYers who need a lightweight and easy-to-use cordless drill for light-duty applications. It features a brushless motor for longer life and more power, a 2-speed transmission for versatile performance, and a 1/2" chuck for use with a variety of bits. The drill is also lightweight and ergonomically designed for comfortable use. It comes with a 1.3Ah NiCd battery, a charger, a belt clip, and a carrying case.

DeWalt DC756 Compare with Similar Item

a table comparing the DeWalt DC756 to some similar items:

Feature	DeWalt DC756	Makita XFD07Z	Milwaukee M18 FUEL
Voltage	20V Max	18V	18V
Runtime	5.0 Ah	5.0 Ah	5.0 Ah
Weight	4.5 lbs	5.1 lbs	4.9 lbs
Price	$119	$139	$149

As you can see, the DeWalt DC756 is the lightest of the three drills, but it also has the shortest runtime. The Makita XFD07Z and Milwaukee M18 FUEL are both slightly heavier, but they have longer runtimes. The Makita XFD07Z is also the most expensive of the three drills.

Ultimately, the best drill for you will depend on your individual needs. If you're looking for a lightweight drill with a short runtime, the DeWalt DC756 is a good option. If you need a drill with a longer runtime, the Makita XFD07Z or Milwaukee M18 FUEL are better choices.

Here is a more detailed comparison of the three drills:

DeWalt DC756

• Pros: Lightweight, affordable
• Cons: Short runtime

Makita XFD07Z

• Pros: Long runtime, powerful motor
• Cons: Heavy, expensive

Milwaukee M18 FUEL

• Pros: Long runtime, powerful motor, compact design
• Cons: Expensive

I hope this helps!

DeWalt DC756 Pros/Cons and My Thought

a comprehensive overview of the DeWalt DC756 impact driver, including pros, cons, user reviews, and my thoughts:

Pros:

• Powerful motor: The DC756 has a powerful 18-volt motor that can handle even the toughest tasks.
• Compact and lightweight design: The DC756 is compact and lightweight, making it easy to maneuver in tight spaces.
• Variable speed trigger: The variable speed trigger allows you to control the amount of torque, making it ideal for a variety of applications.
• Brushless motor: The brushless motor is more efficient and durable than a traditional brushed motor.
• Long battery life: The DC756 comes with two 2.0Ah batteries that provide long lasting power.
• Durable construction: The DC756 is made with durable materials that can withstand heavy use.

Cons:

• Pricey: The DC756 is a bit more expensive than some other impact drivers on the market.
• No belt clip: The DC756 does not come with a belt clip, so you will need to find a way to store it yourself.
• Not as powerful as some other impact drivers: The DC756 is powerful, but it is not as powerful as some other impact drivers on the market.

User reviews:

Overall, user reviews of the DeWalt DC756 are positive. Many users praise the power and durability of the impact driver. Some users also like the compact and lightweight design. However, some users have complained about the price and the lack of a belt clip.

My thoughts:

Overall, I think the DeWalt DC756 is a great impact driver. It is powerful, durable, and compact. I would recommend it to anyone who is looking for a high-quality impact driver. However, if you are on a budget, there are other impact drivers on the market that are more affordable.

Here are some additional thoughts:

• The DC756 is a great choice for professional users who need a powerful and durable impact driver.
• The DC756 is also a good choice for DIYers who need an impact driver for occasional use.
• If you are looking for an affordable impact driver, there are other options on the market. However, the DC756 is a great value for the price.

I hope this helps!

DeWalt DC756 Where To Buy

Here are some places where you can buy a DeWalt DC756 drill and spare parts:

• DeWalt direct: You can buy the drill and spare parts directly from the DeWalt website. They have a wide selection of parts available, and they offer free shipping on orders over $50.
• Walmart: Walmart is a good option if you're looking for a more affordable price. They usually have the drill in stock, and they also have a limited selection of spare parts available.
• Amazon: Amazon is another great option for finding a DeWalt DC756 drill. They have a wide selection of drills and spare parts available, and they often have competitive prices.
• Best Buy: Best Buy is a good option if you're looking for a brick-and-mortar store where you can buy the drill. They usually have the drill in stock, and they also have a limited selection of spare parts available.
• Lowe's: Lowe's is another good option for finding a DeWalt DC756 drill in a brick-and-mortar store. They usually have the drill in stock, and they also have a limited selection of spare parts available.
• eBay: eBay is a good option if you're looking for a used DeWalt DC756 drill or spare parts. You can often find them for a fraction of the price of a new drill.

I hope this helps!

DeWalt DC756 Problems and Solutions

some common issues and problems with the DeWalt DC756 and their expert-recommended solutions:

• The drill won't turn on. Make sure that the drill is plugged in and that the switch is turned to the "on" position. If the drill still won't turn on, check the fuse. If the fuse is blown, replace it.
• The drill is making a loud noise. This could be a sign of a bearing problem. To check the bearings, remove the chuck and spin the drill by hand. If you hear any grinding or rattling noises, the bearings need to be replaced.
• The drill is not drilling straight. This could be a sign of a bent chuck. To check the chuck, tighten it onto a piece of wood and see if it drills a straight hole. If the hole is not straight, the chuck needs to be replaced.
• The drill is not getting enough power. This could be a sign of a problem with the battery. To check the battery, charge it fully and then try using the drill again. If the drill still doesn't have enough power, the battery may need to be replaced.

Here are the step-by-step instructions on how to fix each of these problems:

• To fix the drill not turning on, first check the power cord to make sure that it is plugged in tightly. If the power cord is plugged in tightly and the drill still won't turn on, check the switch. The switch may be faulty and need to be replaced.
• To fix the drill making a loud noise, first remove the chuck and spin the drill by hand. If you hear any grinding or rattling noises, the bearings need to be replaced. To replace the bearings, you will need to disassemble the drill and remove the old bearings. Once the old bearings are removed, install the new bearings and reassemble the drill.
• To fix the drill not drilling straight, first tighten the chuck onto a piece of wood and see if it drills a straight hole. If the hole is not straight, the chuck may be bent. To straighten the chuck, you can use a pair of pliers to gently bend it back into shape.
• To fix the drill not getting enough power, first charge the battery fully. If the drill still doesn't have enough power after the battery is fully charged, the battery may need to be replaced. To replace the battery, you will need to purchase a new battery that is compatible with your drill.

I hope this helps!

DeWalt DC756 Manual

DeWalt DC756 Bench Grinder Manual

Safety Information

• Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
• To reduce the risk of injury, read the instruction manual.
• Do not use the bench grinder if it is damaged.
• Keep the work area clean and well-lit.
• Do not operate the bench grinder in wet or damp conditions.
• Keep bystanders away from the work area.
• Wear safety glasses with side shields and a dust mask whenever you use the bench grinder.
• Use the correct grinding wheel for the job.
• Do not use the bench grinder to grind:
  • Soft metals such as lead or aluminum.
  • Materials that are wet or oily.
  • Wheels that are cracked or chipped.
• Do not overload the bench grinder.
• Turn off the bench grinder before changing grinding wheels or making adjustments.
• Allow the bench grinder to cool down before storing it.

Before Use

• Inspect the bench grinder for any damage before using it.
• Make sure that the grinding wheels are properly installed and in good condition.
• Tighten all nuts and bolts.
• Connect the bench grinder to a properly grounded outlet.
• Turn on the bench grinder and allow it to run for a few minutes to make sure that it is working properly.

Troubleshooting

• If the bench grinder does not start, check the power cord and outlet.
• If the bench grinder vibrates excessively, check the mounting bolts and make sure that they are tight.
• If the grinding wheels are not turning, check the switch and wiring.
• If the grinding wheels are smoking, turn off the bench grinder and allow it to cool down. Replace the grinding wheels.

Maintenance

• Inspect the bench grinder regularly for any signs of wear or damage.
• Replace worn or damaged parts immediately.
• Keep the bench grinder clean and free of dust.
• Lubricate the moving parts with a light oil or grease.

Warranty

• DeWalt warrants this product to be free from defects in material and workmanship for a period of three years from the date of purchase.
• If this product becomes defective within the warranty period, DeWalt will repair or replace it, at its option, free of charge.
• This warranty does not cover damage caused by misuse, abuse, or accidents.

Contact Information

• DeWalt Customer Service
• 1-800-4-DeWALT (1-800-433-9258)
• www.dewalt.com

Additional Information

• The bench grinder can be used to grind, sharpen, and polish a variety of materials, including metals, plastics, and wood.
• The bench grinder comes with two grinding wheels, a coarse wheel (36 grit) and a medium wheel (60 grit).
• The coarse wheel is used for rough grinding, while the medium wheel is used for finishing.
• The bench grinder also comes with a tool rest, which can be used to hold the workpiece in place while it is being ground.
• The bench grinder is a powerful tool and should be used with caution. Always wear safety glasses and a dust mask when using the bench grinder.
• Never overload the bench grinder.
• Turn off the bench grinder before changing grinding wheels or making adjustments.
• Allow the bench grinder to cool down before storing it.